| Content | Refreshing gel-to-foam facial cleanser for blemish-prone skin, that helps to reduce the appearance of blemishes and blackheads, while leaving the skin feeling soft and smooth. The formula penetrates pores to eliminate the cause of spots & blemishes, while respecting the skin’s natural barrier.
DEVELOPED WITH DERMATOLOGISTS:
All CeraVe products have been Developed with Dermatologists.
SPECIFICALLY FORMULATED FOR BLEMISH-PRONE SKIN:
Take control of your skin, with CeraVe Blemish Control range. This gentle face wash formula easily lathers to effectively remove dirt, impurities and excess oils without stripping the skin of moisture.
Active Ingredients:
- The daily cleanser contains 3 Essential Ceramides, Niacinamide and 2% Salicylic Acid
- Formulated with an oil-absorbing technology using Hectorite Clay, CeraVe Blemish Control Cleanser helps remove dirt and excess oil, to minimise shine.
Benefits:
- Reduces the appearance of blackheads and blemishes
- Gently exfoliates dead skin cells that can clog pores and contribute to blemishes
- Formulated with an oil-absorbing technology to minimise shine
- Leaves comfortable, refreshed and healthy-looking skin
- Number of spots appear reduced by up to 34%*
- 94% agree skin feels clean and purified**
- 80% agree visible pores look clear**
*Clinical study, 6 weeks, 48 subjects.
** Consumer Self-Assessment. 57 participants.
How to use:
- Recommended use morning and evening. Use pump applicator to apply to wet hands and massage into the skin. Rinse thoroughly.
- Avoid contact with eyes. If contact occurs, rinse thoroughly with water.
DISCOVER CERAVE’S EVERYDAY ROUTINE FOR BLEMISH-PRONE SKIN:
- Step 1: Cleanse the skin thoroughly using CeraVe Blemish Control Cleanser. Recommended use day and night.
- Step 2 [AM]: In the morning, follow with CeraVe AM Facial Moisturising Lotion SPF 50
- Step 2 [PM]: In the evening, apply Cerave Blemish Control Gel Facial Moisturiser. Use the applicator to dispense product onto fingers. Apply all over face for general application or use as a targeted treatment on affected areas.
To help reduce the appearance of discolouration and post-acne marks, swap out the Blemish Control Gel for CeraVe Retinol Resurfacing Serum. Recommended use in the evening only & always follow with SPF 50 protection in the daytime.
Suitable for
Blemish-Prone
Combination
Ingredients
AQUA/WATER, SODIUM LAUROYL SARCOSINATE, COCAMIDOPROPYL HYDROXYSULTAINE, GLYCERIN, NIACINAMIDE, SALICYLIC ACID, GLUCONOLACTONE, SODIUM METHYL COCOYL TAURATE, PEG-150 PENTAERYTHRITYL TETRASTEARATE, CERAMIDE NP, CERAMIDE AP, CERAMIDE EOP, CARBOMER, CALCIUM GLUCONATE, TRIETHYL CITRATE, SODIUM BENZOATE, SODIUM HYDROXIDE, SODIUM LAUROYL LACTYLATE, CHOLESTEROL, TETRASODIUM EDTA, CAPRYLYL GLYCOL, HYDROLYZED HYALURONIC ACID, TRISODIUM ETHYLENEDIAMINE DISUCCINATE, XANTHAN GUM, HECTORITE, PHYTOSPHINGOSINE, BENZOIC ACID. (Code F.I.L. C274845/2) | Product Features & BenefitsÂ
Skin needs moisture around the clock. A night cream with niacinamide is ideal to soothe skin while you sleep. For maximum hydration and skin-barrier replenishment that helps the skin hold on to moisture, look for ingredients like hyaluronic acid and ceramides. We recommend a non-comedogenic nighttime moisturizer like CeraVe PM Facial Moisturizing Lotion which has both ingredients and won’t clog pores or cause acne flare-ups.
Ideal for normal to oily skin, CeraVe PM Facial Moisturizer features three essential barrier-strengthening ceramides, hydrating hyaluronic acid and soothing niacinamide in an oil-free, non-comedogenic formula. This rich yet lightweight night cream uses patented MVE Delivery Technology to deliver a steady stream of much-needed moisture throughout the night, and helps the skin hold on to it.
- Ultra-lightweight night cream
- MVE Technology: This patented delivery system continually releases moisturizing ingredients for 24-hour hydration
- Ceramides: Essential for healthy skin, ceramides help restore and maintain the skin’s natural barrier
- Hyaluronic acid: This ingredient attracts hydration to the skin’s surface and helps the skin retain moisture
- Niacinamide: Helps repair a compromised skin barrier while improving the appearance of the skin
- Non-comedogenic, hypoallergenic, oil-free, fragrance-free and non-irritating
- Developed with dermatologists
How to Use
- Unlock the pump for first time use by twisting it to the left and pressing down several times until the product comes out. Note: You may actually have to press down on the pump as many as 10-20 times to initially begin dispensing lotion.
- Apply liberally to the face and neck at night, or as directed by a physician
IngredientsÂ
Aqua / Water / Eau, Glycerin, Caprylic/Capric Triglyceride, Niacinamide, Cetearyl Alcohol, Potassium Phosphate, Ceramide Np, Ceramide Ap, Ceramide Eop, Carbomer, Dimethicone, Ceteareth-20, Behentrimonium Methosulfate, Sodium Lauroyl Lactylate, Sodium Hyaluronate, Cholesterol, Phenoxyethanol, Disodium Edta, Dipotassium Phosphate, Caprylyl Glycol, Phytosphingosine, Xanthan Gum, Polyglyceryl-3 Diisostearate, Ethylhexylglycerin | Product Features & BenefitsÂ
Eye puffiness and dark circles are among the most common eye-area skin concerns but a repair eye cream can help smooth and brighten this delicate skin. For optimal results with minimal irritation, look for an eye cream with ceramides that replenish the skin’s natural barrier, hyaluronic acid to plump up fine lines with extra hydration and soothing niacinamide. It’s also important to use an ophthalmologist-tested product such as CeraVe Eye Repair Cream that has been recognized as safe for use around the eyes.
CeraVe Eye Repair Cream features a Marine & Botanical Complex to help reduce the appearance of dark circles, eye puffiness and brighten the entire eye area. Suitable for all skin types, this non-greasy, fast-absorbing, fragrance-free eye cream also contains three essential ceramides, hyaluronic acid and niacinamide, plus patented MVE Delivery Technology that releases a steady stream of moisture for skin nourishment around the clock.
- Reduce the appearance of dark circles and eye puffiness
- Non-greasy, fast-absorbing formula
- Suitable for all skin types
- Ceramides: Essential for healthy skin, ceramides help restore and maintain the skin’s natural barrier
- Hyaluronic acid: This ingredient attracts hydration to the skin’s surface and helps the skin retain moisture
- Niacinamide: Helps the skin barrier and calms the skin
- Non-comedogenic, hypoallergenic, fragrance-free
- Ophthalmologist-tested and allergy-tested
- Developed with dermatologists
- Accepted by the National Eczema Association
How to UseÂ
- Apply in small dots around the eye area
- Gently smooth until thoroughly absorbed
- Use alone or under makeup once or twice a day in the AM and/or PM
IngredientsÂ
Aqua / Water / Eau, Niacinamide, Cetyl Alcohol, Caprylic/Capric, Triglyceride, Glycerin, Propanediol, Isononyl Isononanoate, Jojoba Esters, Peg-20 Methyl Glucose Sesquistearate, Cetearyl Alcohol, Dimethicone, Methyl Glucose Sesquistearate, Asparagopsis Armata Extract, Ceramide Np, Ceramide Ap, Potassium Sorbate, Ceramide Eop, Sorbitol, Carbomer, Zinc Citrate, Behentrimonium Methosulfate, Triethanolamine, Aloe Barbadensis Leaf Extract, Sodium Lauroyl Lactylate, Sodium Hydroxide, Equisetum Arvense Extract, Sodium Hyaluronate, Cholesterol, Phenoxyethanol, Prunus Amygdalus Dulcis Oil / Sweet Almond Oil, Tocopherol, Ascophyllum Nodosum Extract, Laureth-4, Hydrogenated Vegetable Oil, Tetrasodium Edta, Maltodextrin, Phytosphingosine, Xanthan Gum, Butylene Glycol, Ethylhexylglycerin, Chrysanthellum Indicum Extract | Use to prevent injury, control edema, and pain management.
Size 5cm x 5m. | It’s important to choose a formula that won’t disrupt the skin’s natural protective barrier or strip the skin of its natural moisture. CeraVe Hydrating Facial Cleanser is a gentle face wash with ingredients like ceramides which reinforce the barrier and help the skin lock in moisture, along with hyaluronic acid that attracts hydration to the skin’s surface.
CeraVe Hydrating Cleanser was developed with dermatologists to cleanse and refresh the skin without over-stripping it or leaving it feeling tight and dry. Featuring three types of essential ceramides to restore the skin’s barrier and hydrating hyaluronic acid, this non-comedogenic face wash is an effective yet non-irritating way to start off any skincare regimen for normal to dry skin—and it uses MVE Delivery Technology to supply the skin with a steady stream of nourishment throughout the day and night.
- Suitable for normal to dry skin
- MVE Technology: This patented delivery system continually releases moisturizing ingredients for 24-hour hydration
- Ceramides: Essential for healthy skin, ceramides help restore and maintain the skin’s natural barrier
- Hyaluronic acid: This ingredient attracts hydration to the skin’s surface and helps the skin retain moisture
- Non-comedogenic, non-irritating and fragrance-free
- Developed with dermatologists
- Accepted by the National Eczema Association
How to Use
- Wet skin with lukewarm water
- Massage cleanser into skin in a gentle, circular motion
- Rinse
IngredientsÂ
Aqua / Water / Eau, Glycerin, Cetearyl Alcohol, Peg-40 Stearate, Stearyl Alcohol, Potassium Phosphate, Ceramide Np, Ceramide Ap, Ceramide Eop, Carbomer, Glyceryl Stearate, Behentrimonium Methosulfate, Sodium Lauroyl Lactylate, Sodium Hyaluronate, Cholesterol, Phenoxyethanol, Disodium Edta, Dipotassium Phosphate, Tocopherol, Phytosphingosine, Xanthan Gum, Cetyl Alcohol, Polysorbate 20, Ethylhexylglycerin |
- Developed with dermatologists, CeraVe AM Facial Moisturising Lotion SPF50+ is suitable for normal to dry skin on the face. Also suitable for acne-prone skin.
- With 3 essential ceramides and SPF50+, the gentle formula contains broad spectrum protection to defend the skin barrier against UVA & UVB rays. The fast-absorbing moisturiser also helps protect the skin against pollution particles.
- Powered by CeraVe’s patented delivery system, MVE technology, the lightweight lotion offers a continuous release of moisturising ingredients throughout the day, providing up to 24-hour hydration. Skin feels calm and hydrated, and looks balanced.
- Non-comedogenic. Fragrance free. Non-greasy texture.
- Fragrance free and non-comedogenic.
- For your daily facial routine, firstly cleanse with CeraVe Hydrating Cleanser for normal to dry skin, or CeraVe Foaming Cleanser for normal to oily skin. Secondly, give your skin a hydration boost with CeraVe Hydrating Hyaluronic Acid Serum, and finally finish with CeraVe AM Facial Moisturising Lotion SPF50+ to hydrate while protecting the skin from daily aggressors.
- It also contains Vitamin E and Niacinamide, and leaves skin soothed and hydrated.
Ingredients
AQUA / WATER • GLYCERIN • ISOPROPYL PALMITATE • BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE • ETHYLHEXYL SALICYLATE • NIACINAMIDE • PENTYLENE GLYCOL • BUTYL METHOXYDIBENZOYLMETHANE • ETHYLHEXYL TRIAZONE • PROPANEDIOL • ZEA MAYS STARCH / CORN STARCH • POTASSIUM CETYL PHOSPHATE • DIISOPROPYL SEBACATE • ORYZA SATIVA CERA / RICE BRAN WAX • STEARIC ACID • CERAMIDE NP • CERAMIDE AP • CERAMIDE EOP • CARBOMER • GLYCERYL STEARATE • CETEARYL ALCOHOL • TRIETHANOLAMINE • BEHENTRIMONIUM METHOSULFATE • TRIETHYL CITRATE • SODIUM HYALURONATE • SODIUM POLYACRYLATE • SODIUM LAUROYL LACTYLATE • MYRISTIC ACID • CHOLESTEROL • PALMITIC ACID • TOCOPHEROL • CAPRYLYL GLYCOL • CITRIC ACID • TRISODIUM ETHYLENEDIAMINE DISUCCINATE • XANTHAN GUM • PHYTOSPHINGOSINE • ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER • BUTYROSPERMUM PARKII BUTTER / SHEA BUTTER • BENZOIC ACID • PEG-100 STEARATE
How to Use
- After cleansing, use pump applicator to dispense product onto fingertips, or directly onto face.
- Apply liberally to face and neck in the morning daily.
- This product is for daily photoprotection care. When exposed to intense or prolonged sun, use an adapted sunscreen.
- Avoid contact with eyes. If contact occurs rinse thoroughly with water.
|
Reviews
There are no reviews yet.